Artel DLC450 - Manual (Page 2)

www.artel.com | 978-263-5775 | [email protected] | [email protected]
HD-SDI Video-Over-IP Gateway
[DLC450]
DLC450 Rear Panel LEDs
LED Function Color Description
OK
Module
Status
OFF No power or if power is applied to the system, an internal fault with the DLC450 may exist.
n Green Normal operation.
n Yellow Minor alarm.
n Red Major alarm.
TX ENC
Transmitter
Mode Indicator
OFF Receiver mode is selected.
n Green TX Mode: Valid HD-SDI detected.
n Yellow TX Mode: No HD-SDI detected.
n Red TX Mode: Configuration error. Invalid SDI format received
RX DEC
Receiver Mode
Indicator
OFF Transmitter mode is selected.
n Green RX Mode: Valid HD-SDI detected.
n Yellow RX Mode: No HD-SDI video lock detected.
n Red RX Mode: No video and CRC errors.
 Red RX Mode: Valid video with CRC errors.
SFP A TX SFP Transmit
OFF No SFP installed or disabled
n Green Normal operation
n Red SFP TX Fault
SFP A RX SFP Receive
OFF No SFP installed or SFP disabled.
n Green Link established with no activity
 Green Link established with data activity
 Yellow RX optical power high.
n Red RX low optical power or SFP fault. Ethernet link down.
 Red RX low optical power or SFP fault.
SFP B TX Not Used OFF Not used, for future use.
SFP B RX Not Used OFF Not used, for future use.
 Flashing green |  Flashing yellow |  Flashing red
DLC450 Front Panel LEDs
LED Function Color Description
OK
Module
Status
OFF No power or if power is applied to the system, an internal fault with the DLC450 may exist.
n Green Normal operation.
n Yellow Minor alarm.
n Red Major alarm.
TX
Transmitter
Mode Indicator
OFF Receiver mode is selected.
n Green TX Mode: Valid HD-SDI detected.
n Yellow TX Mode: No HD-SDI detected.
n Red TX Mode: Configuration error. Invalid SDI format received
RX
Receiver Mode
Indicator
OFF Transmitter mode is selected.
n Green RX Mode: Valid HD-SDI detected.
n Yellow RX Mode: No HD-SDI video lock detected.
n Red RX Mode: No Video and CRC Errors.
 Red RX Mode: Valid Video with CRC Errors.
A Link SFP Link
OFF No SFP installed or SFP disabled.
n Green Link established.
 Green Data activity on link.
 Yellow RX optical power high.
n Red RX low optical power or SFP fault. Ethernet link down.
 Red RX low optical power or SFP fault.
B Link Not Used Off Not used, for future use.
Install SFP + s
Install an Artel SFP+ in socket A only.
Socket B is for future use.
AR208-008450-B00_C