Artel DLC170DA User Manual
Digilink, Artel ships the dlc170da configured as follows, Dip switch configurations
Simplifying Media Transport
™
DigiLink
Media
Transport Simplified
QUICK START GUIDE
Artel ships the DLC170DA configured as follows:
•
Video source is optical SDI from the SFP
•
Analog video pedestal enabled
•
Analog video enabled through the BNC connector
•
Alarm disabled for no video present
•
Analog audio output
•
+20 dBm (600 ohms) peak audio level
•
Audio de-embed enabled from group #1
•
Optical repeating disabled
•
EMS override enabled (DigiLink Manager can change the DLC170DA configuration)
SW1 CONFIGURATION
Function
Off
On
S1
Pedestal
Disabled
Enabled
S2
BNC Out Format
SDI
Analog
Factory Default: All on
DIP Switch Configurations
S3
S4
S5
SDI Source Select
On On On
SFP Optical Receiver
Off Off Off
Backplane 1
Off On Off
Backplane 2
Off Off On
Backplane 3
Off On On
Backplane 4
On Off Off
Reserved
On On Off
Reserved
On Off On
Reserved
Factory Default: All on
SW1
Controls various video functions
of the DLC170DA, such as source
selection (SFP, backplane), video
characteristics (pedestal) and the
loss of video alarm
SW2
Controls various audio
characteristics of the DLC170DA
(output enable, format, and source
group), determines if the DLC170DA
acts as a repeater, and enables the
EMS override function
SW4
Controls the peak analog audio level
(Rotary
that the DLC170DA produces
Switch)
Function
Off
On
S6
Reserved
-
Must be On
S7
Reserved
-
Must be On
S8
Loss of Video
Alarm
Enabled
Disabled
Factory Default: All on
SW2 CONFIGURATION
Function
Off
On
S1
Audio
De-embed-
ding
Disabled
Enabled
S2
Audio Output
Format
AES
Analog
Factory Default: All on
Function
Off
On
S5
Reserved
-
Must be On
S6
Reserved
-
Must be On
S7
SFP Repeater
Enabled
Disabled
S8
EMS Override
Local
Control
Remote
Control
Factory Default: All on
S3
S4
Audio Destination
On On
Group 1
Off On
Group 2
On Off
Group 3
Off Off
Group 4
Factory Default: All on
SW4 CONFIGURATION PEAK AUDIO LEVEL
POS
Function
0
+10 dBm
1
+12 dBm
2
+14 dBm
3
+16 dBm
4
+18 dBm
5
+20 dBm
6
+22 dBm
7
+24 dBm
Factory Default: +20 dBm
SW1
SW2
SW4
Configuration Switch Functions
SDI to Composite Video (NTSC/PAL) Analog Audio
Conversion with Optical Receiver/Repeater [DLC170DA]