ART Pro Audio USB Phono Plus - Project Series User Manual

Page 15

SPECIFICATIONS:

Frequency Response:

10 Hz – 50 kHz, +/- 0.5%

THD:

<0.01% typical @ 1 kHz

Hum and Noise:

>90 dB below clipping

Input Impedance:

47k Ohms/100pf (phono), 270k Ohms (line)

Maximum Input Level:

40 mV rms @ 1 kHz (phono), +19dBu (line)

Maximum Gain:

45dB @ 1 kHz (phono), 6dB (line)

Analog Input Connections:

RCA (preamp / phono/line output)

Analog Output Connection:

RCA (preamp line output)

1/8” (monitor/headphone output)

Maximum Output Level:

+6dBu (1.4V rms)

Filter Type / Response:

Switchable, high pass (low cut) –3dB @ 22 Hz

A/D-D/A:

16 bit, 44.1 kHz or 48 kHz, USB selectable from computer

0.4 ms A/D latency @ 44.1 kHz

Digital Audio Interface

TOSLINK Opto In to USB,
TOSLINK Opto Out from USB,

S/PDIF coax (RCA) In to USB

Computer Interface:

USB 2.0 compliant

Chassis Type:

All aluminum black anodized with integral rubber sides

Power Requirements:

USB bus powered or
7-12V DC or 9-12V AC @ 150mA (external)
Either polarity of the tip will work with DC power

Dimensions:

1.85 x 4.6 x 4.5 (in)
47 x 117 x 114 (mm)

Weight:

1.35 lbs, 0.61 kg

Note: 0 dBu = 0.775Vrms

ART maintains a policy of constant product improvement.

Therefore, specifications are subject to change without notice.

Go to

for the latest information and on the Project Series

USB Phono Plus.