Argox PT-60 - Manual (Page 18)

User’s Manual 13
2.4.1 Installing / Replacing the Battery Pack
How to install or replace the main battery in the terminal
1 Slide the main battery compartment
cover lock to the FREE position and
remove the cover
Figure 2-8-1 Installing /Replacing The Battery Pack
2 Load a lithium-ion battery pack into the
main battery compartment in the
direction shown in the figure
Figure 2-8-2 Installing /Replacing The Battery Pack
3 Attach the battery compartment cover to
the terminal and slide the main battery
compartment cover lock to the LOCK
position.
Figure 2-8-3 Installing /Replacing The Battery Pack
Note: Please follow the above procedure in reverse to reassemble the battery cover.
Be sure to turn the terminal OFF before you do this.