Argox PT-60 - Manual (Page 16)

User’s Manual 11
2.3.2 Cradle
Power Connection
1. Attach the DC jack of the AC adapter into the socket of the cradle. Then connect
the AC adapter to the mains outlet. Both LED on the cradle turns green.
Battery charging
1. When the spare battery put in the charging slot, the charging LED on the cradle
turns red during charging state and gets green when fully charged.
2. When the PT-60 terminal with the rechargeable battery placed in the cradle to
charge, the charging LED on the Terminal turns on in red and gets green when full
charged.
Figure 2-6 BatterCharging
Terminal on cradle
Take notice that the PT-60 cradle is designed for the PT-60 or PT-20 terminal. No other type
of terminal can be placed into this cradle. This can cause damages to the connector on the
cradle.
Figure 2-7 Charging
Spare Battery
Charge LED