Installing / replacing the battery pack – Argox PA-20 Portable Data Collectors User Manual User Manual
Page 17

13
2.4.1
Installing / Replacing the Battery Pack
How to install or replace the main battery in the terminal
1
Slide the main battery compartment
cover lock to the FREE position and
remove the cover
2
Load a lithium-ion battery pack into the
main battery compartment in the
direction shown in the figure
3
Attach the battery compartment cover to
the terminal and slide the main battery
compartment cover lock to the LOCK
position.
Figure 2-7 Installing / Replacing the Main Battery
Note:
Please follow the above procedure in reverse to reassemble the battery cover.
Be sure to turn the terminal OFF before you do this.
This manual is related to the following products: