Argox PA-20 Portable Data Collectors User Manual - Manual (Page 15)

11
2.3.2 Cradle
Power Connection
1. Attach the DC jack of the AC adapter into the socket of the cradle. Then connect
the AC adapter to the mains outlet. The LED on the cradle turns green.
Battery Charging
1. When the PA-20 terminal with the rechargeable battery pack is placed in the
cradle, the LED on the cradle turns orange first and turns green at once then it
starts to charge the terminal.
2. When the PA-20 terminal was removed from the cradle, the LED on the cradle
turns orange first and turns green at once.
Figure 2-6 Batter Charging
Terminal on cradle
Take notice that the PA-20 cradle is designed for the PA-20 terminal. No other type of
terminal can be placed into this cradle. This can cause damages to the connector on the cradle.
Figure 2-7 charging
Spare Battery
Charge LED