Argox AS-8150 - Manual (Page 31)

30
UPCA
Insertion group number selection: The scanner offers max.
two insertion groups for one symbology. By setting one or two
digits to indicate which insertion group you want to insert.
You may refer to Character insertion. The function is to insert
specific characters as a group into the transmitted data of
selected symbologies. Enable the group insertion by
selecting the group number.
Example: Group 2
→ set 02 or 20.
Group 1 and 4
→ set 14 or 41.
Notes 1): Group number set to
“0” means that no group
insertion required.
2): Details about the Insert Group settings please refer
to page 98~101, and page 107 ASCII code table.
Supplement digits: The Supplement digits barcode is the
supplemental 2 or 5 characters for WPC code.
Format
Leading
Zero
Data Digits
(11 Digits)
Check
Digit
Supplement Digits
2 or 5 or
UCC / EAN 128