Argox AS-8150 - Manual (Page 27)

26
Indication
Power on alert: After power-on the scanner will generate an
alert signal to indicate a successful self-test.
LED indication: After each successful reading, the LED
above the scanner will light up to indicate a good barcode
reading.
Beeper indication: After each successful reading, the
scanner will beep to indicate a good barcode reading, and its
Beep loudness, Beep tone freq. and Beep tone duration
are adjustable.
Beep loudness/Beep tone freq./Beep tone duration: You
can adjust Beep Loudness, Beep tone and Beep duration for
a good reading to your preferred setting.
Exit