Argox AME-3230 Series User Manual
Page 22
43
AME Series User’s Manual
Interface Specifications
Serial Interface:
RS-232C port with a mini-type 10-pin convertor.
Flow Control mechanism is either RTS/CTS or X-on/X-off (control
characters are DC2 and DC4).
Programmable parameters are listed below:
Speed: 1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200 bauds
Parity: Odd, Even or None.
Data Bits: 7 or 8 bits.
Stop Bit(s): 1 or 2 bits.
Factory Default Parameters: 9600 bauds, no parity,
8 data bits, 1 stop bit.
44
AME Series User’s Manual
Pin
Signal
Description
3
Transmitted Data,
TxD
Output. Serial “Transmitted Data”.
5
Received Data,
RxD
Input. Serial “Received Data”
7
Request to Send,
RTS
Output. Used as the control
signal for “H/W Flow Control “
9
Clear to Send,
CTS
Input. Used as the control signal
for “H/W Flow Control”
10
GND
Signal ground
USB Interface:
This port complies with USB 2.0 Full-Speed communication.
The USB interface is a mini-type USB 10-pin convertor.
Pin
Signal
Description
2
VBUS
5V
4
D -
Differential data signaling pair -
6
D +
Differential data signaling pair +
10
GND
Ground
Bluetooth Interface:
Bluetooth version: 2.0
Communication range: 10 meters