Argox A Series User Manual

Page 26

A Series User’s Manual

Installing a Plug and Play printer driver (for USB only)

1. Turn off the printer. Plug the power cable into the power

socket on the wall, and then connect the other end of the
cable to printer's power socket. Connect the USB cable to the
USB port on the printer and on the PC.

2. Turn on the printer. If the printer supports Plug-and-Play, and

you have successfully connected it using a USB cable, then
the Windows Add Hardware Wizard will automatically detect
the printer and display a dialog that allows you to install a
driver. Click Cancel and do not install the driver using this
wizard.

3. Prepare the documentation and software CD-Rom from

printer package and then install to CD-Rom drive of your
computer. The CD-Rom will bring out the following prompt.
Click “Go”:

Note:
We strongly recommend that you use the Seagull Driver Wizard
instead of the Microsoft Windows Add Printer Wizard when
installing and updating your Drivers by Seagull.
(Even though the "Add Printer Wizard" is from Microsoft, it too
easily performs a number of tasks incorrectly when updating
existing drivers. It also badly handles the situation where a printer
driver is already in use by a Windows application.)

A Series User’s Manual

4. Under A-2240 product selection prompt, choose Seagull

Driver version and then start installation: