Aplex Technology ADP-1125A - Manual (Page 27)

ADP-1XX5A User Manual 27
Plot Calibration Data Check this function and a touch panel linearity
comparison graph appears when you have finished
Advanced Calibration. The blue lines show linearity before
calibration and black lines show linearity after calibration.
Multiple Monitors
Multiple Monitors support from two to six touch screen displays for one system.
The PenMount drivers for Windows XP/2003/Vista/7 support Multiple Monitors. This
function supports from two to six touch screen displays for one system. Each
monitor requires its own PenMount touch screen control board, either installed
inside the display or in a central unit. The PenMount control boards must be
connected to the computer COM ports via the RS232/USB interface. Driver
installation procedures are the same as for a single monitor. Multiple Monitors
support the following modes:
Windows Extends Monitor Function
Matrox DualHead Multi-Screen Function
nVidia nView Function
NOTE: The Multiple Monitor function is for use with multiple displays only.
Do not use this function if you have only one touch screen display.
Please note once you turn on this function the rotating function is
disabled.
Enable the multiple display function as follows: