Aplex Technology ADP-1125A User Manual
Page 24
ADP-1XX5A User Manual
24
4.2 Configuring the PenMount Windows
Upon rebooting, the computer automatically finds the new PenMount 9036 RS232
interface controller board or PenMount 6300 USB interface controller board. The
touch screen is connected but not calibrated. Follow the procedures below to carry
out calibration.
1. After installation, click the PenMount Monitor icon “PM” in the menu bar.
2. When the PenMount Control Panel appears, click “Calibrate”.
PenMount Control Panel
The functions of the PenMount Control Panel are Calibrate, Multiple Monitors, Tools,
and About, which are explained in the following sections.
Device
In this window, you can find out that how many devices are detected on your
system.
Calibrate
This function offers two ways to calibrate your touch screen. “Standard Calibration”
adjusts most touch screens. “Advanced Calibration” adjusts aging touch screens.