Aplex Technology ACS-2170 - Manual (Page 44)

ACS-2170 User Manual 43
Signal Name Pin# Pin# Signal Name
Ground 1 2 NC
NC 3 4 SMB_DATA_R
SMB_CLK_R 5 6 SOC-GPIO22
SOC-GPIO23 7 8 SOC-GPIO25
SOC-GPIO24 9 10 +5V
JTAG：
(2.0mm Pitch 2x5 Pin Header), Reserve.
JP1：
(2.0mm Pitch 1x2 Pin Header), Reserve.
JP2：
(2.0mm Pitch 1x2 Pin Header), Reserve.
CAN1/CAN2：
(3.5mm Pitch 1x10 Pin connector), it provides two CAN-bus Interface.
Pin# Channel Signal Name Function
1
CAN2
CANL2 CAN bus Signal L
2 R2- Terminal resistor R-(internally connected to CANL2)
3 FG Shield cable (FG)
4 R2+ Terminal resistor R+(internally connected to CANH2)
5 CANH2 CAN bus Signal H
6
CAN1
CANL1 CAN bus Signal L
7 R1- Terminal resistor R-(internally connected to CANL1)
8 FG Shield cable (FG)
9 R1+ Terminal resistor R+(internally connected to CANH1)
10 CANH1 CAN bus Signal H
【See TB-528AN2 Manual】