Aplex Technology ACS-2170 - Manual (Page 40)

ACS-2170 User Manual 39
6 DSR (Data Set Ready)
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 JP5 Setting:
Pin1-2: RI (Ring Indicator) (default)
Pin3-4 : 5V Standby power (option)
Pin5-6: 12V Standby power (option)
JP6：
(2.0mm Pitch 2x3 Pin Header), COM_6 setting jumper, pin 1~6 are used to
select signal out of pin 9 of COM_6 port.
JP6 Pin# Function
Close 1-2 RI (Ring Indicator) (default)
Close 3-4 COM_6 Pin9=+5V (option)
Close 5-6 COM_6 Pin9=+12V (option)
COM_6：
(2.0mm Pitch 2X5 Pin Header), COM4 Port, up to one standard RS232 port
are provided. They can be used directly via COM cable connection.
Signal Name Pin# Pin# Signal Name
DCD 1 2 RXD
TXD 3 4 DTR
Ground 5 6 DSR
RTS 7 8 CTS
JP6 Setting: RI/5V/12V 9 10 NC
S1：
PWR BT: POWER on/off Button, They are used to connect power switch
button. The two pins are disconnected under normal condition. You may
short them temporarily to realize system startup & shutdown or awaken the
system from sleep state.
PWR LED: POWER LED status.
S1 Model
Yes TB-528C1U2P1
No TB-528C1U2