Aplex Technology AHM-6086A - Manual (Page 31)

AHM-6XX6A User Manual 30
23. BKL: (2.0mm Pitch 1x5 box Pin Header), Backlight control connector for LVDS1.
Pin# Signal Name
1 +DC12V
2 +DC12V
3 Ground
4 Ground
5 BKLT_EN
6 BKLT_CTRL
24. SATA1/2/3: (SATA 7P), SATA1, SATA2, SATA3 SATA Connectors. Three SATA
connectors are provided, with transfer speed up to 3.0Gb/s.
25. CN1: (2.5mm Pitch 1x2 box Pin Header), an onboard 5V output connector is
reserved to provide power for IDE/SATA devices.
Pin# Signal Name
1 +DC5V
2 Ground
Note:
Output current of the connector must not be above 1A.
26. PC104+: (4x30 Pin), PC104 plus connector, it conforms to standard PC104+
specification.
27. MPCIE2: (30mmx30mm Socket 52Pin), mini PCIE socket, it is located at the top, it
supports mini PCI-E devices with USB2.0, SMBUS and PCI-E signal.
28. MPCIE: (50.95x30mm socket 52Pin), mini PCIE socket, it is located at the bottom,
it supports mini PCI-E devices with USB2.0, SMBUS and PCI-E signal.
29. CF: CF card socket, it is located at the bottom of the board and serves as an insert
interface for Type I and Type II Compact Flash card. The operating voltage of CF
card can be set as 3.3V or 5V. The default setting of the product is 3.3V.
30. DDR3: (SO-DIMM 204Pin socket), DDRIII memory socket, the socket is located at
the bottom of the board and supports 204Pin 1.5V DDRIII 800MHz FSB SO-DIMM
memory module up to 2G.