Aplex Technology APC-3519 User Manual
Page 25
25
15. HDMI1:
(HDMI 19P Connector), High Definition Multimedia Interface connector.
16. DVI-I:
(DVI-I Connector), Digital Visual Interface-Integrated connector.
17. BT1:
POWER on/off Button, They are used to connect power switch button. The two pins are
disconnected under normal condition. You may short them temporarily to realize system
startup & shutdown or awaken the system from sleep state.
18. JP1:
(2.0mm Pitch 2x3 Pin Header),COM1 jumper setting, pin 1~6 are used to select signal
out of pin 9 of COM1 port.
JP1 Pin#
Function
Close 1-2
COM1 Pin9 RI (Ring Indicator) (default)
Close 3-4
COM1 Pin9 = +5V
(option)
Close 5-6
COM1 Pin9 = +12V
(option)
19. JP1A:
(2.0mm Pitch 2x8 Pin Header),COM1 jumper setting, it provides selectable RS232 or
RS422 or RS485 serial signal output.
Function
JP1A Pin#
RS232
(Default)
Close:
Pin1-3, Pin2-4, Pin7-9, Pin8-10, Pin13-14
RS422
(option)
Close:
Pin3-5, Pin4-6, Pin9-11, Pin10-12, Pin17-18
RS485
(option)
Close:
Pin3-5, Pin4-6, Pin9-11, Pin10-12, Pin15-16