Zilog Z16FMC2 - Manual (Page 4)

Opto-Isolated USB SmartCable
User Manual
UM019506-0814 Page 4 of 8
64-bit systems:
\device drivers\USB\x64

\device drivers\USB\x64
7. Click Next to install the driver. In 32-bit systems, the Windows Security dialog will
appear; click Install this driver software anyway .
8. Click Close after the Wizard finishes the installation.
Windows Vista 32-Bit and 64-Bit Systems
1. Connect the USB SmartCable to the host PC. The Found New Hardware dialog box
should appear.
2. In this dialog, select Locate and install driver software (recommended) . When the
User Account Control window appears, click Continue . The Driver Software Installa-
tion window is displayed, followed by the Found New Hardware-USB SmartCable
dialog box.
3. Select I don’t have the disc. Show me other options .
4. Select Browse my computer for driver software (advanced) .
5. Browse to one of the following driver directories:
32-bit Vista systems:
\device drivers\USB\x32

\device drivers\USB\x32
64-bit Vista systems:
\device drivers\USB\x64

\device drivers\USB\x64
6. Click Next to display the Windows Security dialog box.
7. Click Install this driver software anyway .
8. When the software has been installed successfully, click Close .
Windows XP 32-Bit Systems
1. Connect the USB SmartCable to the host PC. The Found New Hardware Wizard
should activate automatically upon connecting the USB Programmer for the first time.
If you are prompted to connect to Windows Update, click
No, not at this time .