Zilog ZEPIR0BA - Manual (Page 14)

UM026001-0413 Hardware and Software Development Support
ZMOTION ® Detection Module II Evaluation Kit
User Manual
10
Hardware and Software Development
Support
The ZMOTION Detection Module II Evaluation Kit provides support for developing
hardware and software for the module. Signals from ZDM II are available to the prototype
area as four through-hole connections. 3.3 V (V
DD
) and ground are also provided to this
area. Do not exceed 90 mA of current draw from the 3.3 V supply.
Software development is supported on the ZDM II Evaluation Board by using the Debug
connector (J9) with a separately available USB SmartCable and ZDS II. ZDS II is Zilog’s
Integrated Development Environment (IDE) and is
available free from the Zilog website .
The USB SmartCable provides a means to download and debug the software developed on
ZDS II.
To learn more about developing your own ZDM II hardware and software, refer to the
Schematic Diagrams section on page 12; also see the ZMOTION Detection Module II
Product Specification (PS0305) . For a description of the ZDM II software operation, see
the ZMOTION Detection Module II Reference Design (RD0026) .
Evaluation Board Hardware Functions
Table 1 describes the functions provided by the ZMOTION Detection Module II Evalua-
tion Kit hardware.