Zilog EZ80F91AZA - Manual (Page 23)

UM007518-1211 USB Configuration
Zilog Real-Time Kernel: eZ80
®
CPU
User Manual
13
The format of this header file is XXXXX_Driver.h , in which XXXXX represents the
MT28F008, AM29LV160, AT49BV162 or IntFlash drivers that are located in the follow-
ing path:
\Program Files\Zilog\

ZDSII_eZ80Acclaim!_A.B.C\ZTP\ZTPX.Y.Z_Lib\RZK\Inc
USB Configuration
The configurable parameters for the USB driver are located in the EZ80D12_conf.c file.
This source file is located in the following path:
\Program Files\Zilog\

ZDSII_eZ80Acclaim!_A.B.C\ZTP\ZTPX.Y.Z_Lib\RZK\Conf
To change any USB device configuration parameters, include this file in the project and
set the appropriate values, as defined in Table 9. For more information about USB Specifi-
cation, refer to
www.usb.org .
Table 9. Configurable USB Driver Parameters
Variable/Macro Default Value Description/Valid Values
EZ80D12_TASK_PRIO 16 Priority of USB thread.
EZ80D12_THD_STACK_SIZE 2048 Stack size of the USB interrupt thread.
g_remoteWakeUp 0x02 Remote wakeup is enabled and can wake up
the host during suspend.
G_powerStat 0x01 Decides if the device is Self powered or Bus
powered.
g_testMode EZ80D12_SET_ZERO Test mode allows the device to exhibit vari-
ous conditions.
gst_DevDescrip — Standard Device Descriptor.
gst_CompositDescrip — Composite Descriptor, which consists of Con-
figuration Descriptor + Interface Descriptor +
End Point Descriptor (EP2in + EP2Out).