Zilog Z8F0411 - Manual (Page 9)

MDS General-Purpose Board Development Kit
User Manual
UM016905-1207 Introduction
4
MDS-GP board Overview
The MDS-GP application board is controlled by an MDS-compatible
processor module (MDS-PM). The MDS system interface consists of two
common 60-socket headers (labeled JP1 and JP2 on the MDS-GP board)
that connect to mating pins on the MDS processor module.
The eZ80Acclaim! ® , Z8 Encore! XP ® 64K Series Flash Microcontrollers,
and ZNEO ® Z16F processor modules can fully utilize the MDS-GP board
features (see Board Features on page 2) whereas Z8 Encore! XP F0822
Series Flash Microcontrollers and Z8 Encore! XP modules cannot use all
MDS-GP board features. The CD-ROM provided with MDS-GP kit
includes sample projects that use many of the board’s features.
For sample project descriptions, refer to MDS General-Purpose Board
Quick Start Guide (QS0045).
Z8 Encore! XP processor modules do not support I 2 C features.
Also, the external clock source present on revision A of the
Z8 Encore! XP module cannot be used. You must select the
internal 32 KHz or 5 MHz clock source on this module.
Note: