Troubleshooting and developer guidelines, Overview, Recheck procedures with the quick start guide – Zilog ZUSBOPTS User Manual
Page 18: Irda port not working, Zilog customer support contact
Troubleshooting and Developer Guidelines
UM019206-1011
12
Z8FMC16100 Series Motor Control Development Kit
User Manual
Troubleshooting and Developer
Guidelines
Overview
Before contacting Zilog Customer Support to submit a problem report, please observe the
steps that follow. If there is a hardware failure, contact a local Zilog representative for
assistance.
Recheck Procedures with the Quick Start Guide
Follow the procedures in the
, and verify that the kit is set up as specified. This quick start guide is
available in the Z8FMC16100 Series Motor Control Development Kit.
IrDA Port Not Working
If you plan on using the IrDA transceiver on the MC MDS Module, ensure that the hard-
ware is set up as follows:
•
DIS_IRDA jumper J3 must be OUT (shunt not installed) to enable the control gate
that drives the IrDA device
•
DIS_RS232 jumper J2 must be IN (shunt installed) to disable the console serial port
driver
Zilog Customer Support Contact
For additional troubleshooting solutions, refer to ZDS II Online Help. For valuable infor-
mation about customer and technical support, as well as hardware and software develop-
ment tools, visit the
the latest
released versions of ZDS II.