Zilog ZUSBOPTS - Manual (Page 10)

MC MDS Module Description UM019206-1011
4
Z8FMC16100 Series Motor Control Development Kit
User Manual
Features
The features of the MC MDS Module include:
•
Z8FMC16100 device operating at 20 MHz, with 16 KB of internal Flash memory and
512 B of internal register SRAM
•
20 MHz ceramic resonator Y1
•
Two SPDT switches, S1 and S2 (labeled DIRECTION and RUN/STOP, respectively)
•
One 5K potentiometer, R7 (labeled SPEED)
•
Green LED D4 (illuminates when 3.3 VDC is applied to the board)
•
Three general-purpose LEDs D1, D2, and D3
•
IRDA interface
•
RS-232 port
•
6-pin DBG interface
•
Two 60-pin headers for connecting to the 3-Phase Motor Control Application Board
(JP1 and JP2; JP1 used for physical mounting only)
MCU
The Z8FMC16100 Series Flash microcontrollers, a part of the Z8 Encore! MC
™
family of
motor control devices are based on Zilog’s advanced eZ8 8-bit CPU core. Optimized for
motor control applications, these devices support the control of single and multi-phase
variable-speed motors. Target applications are large appliances, small appliances, and
HVAC.
The Z8FMC16100 Series Motor Control Development Kit consists of circuitry to support
and present all the features of the Z8FMC16100 MCU. The key features of the
Z8FMC16100 MCU include:
•
20 MHz Zilog eZ8 CPU core
•
16 KB Flash Program Memory
•
512 B Register SRAM
•
Fast 8-channel 10-bit Analog-to-Digital Converter (ADC) for current sampling and
back-EMF detection
•
12-bit pulse-width modulator (PWM) module with three complementary pairs or six
independent PWM outputs with dead-band generation and fault trip input
•
One 16-bit timer with capture/compare/PWM capability