Zilog S3F80QB - Manual (Page 26)

UM026703-1014 Install the S3 Flash ISP Driver
S3F80QB Development Kit
User Manual
23
Appendix B. Install the S3 Flash ISP Driver
The S3 Flash ISP can be installed on PCs that run on Windows 7 (32- and 64-bit), Win-
dows Vista (32- and 64-bit) and Windows XP operating systems. The procedure in this
section will guide you through the S3 Flash ISP installation process.
Observe the following steps to install the S3 Flash ISP on a Windows 7 system.
1. Connect the S3 Flash ISP to a USB port on your development PC, as shown in
Figure 23. When the PC detects the new hardware, it will display the Installing device
driver software dialog.
Windows automatically searches for the driver; this process can take a few moments.
Because there is no option to terminate this search process, wait for the search to com-
plete.
2. If Windows cannot find the driver, you will see a message similar to the message
shown in Figure 24; close the Search dialog and proceed to Step 3.
Figure 23. Connect the S3 Flash ISP to the USB Port
Figure 24. Message Indicating Device Driver Not Located
Note: