Zilog S3F80P5 - Manual (Page 9)

UM026602-0515 P R E L I M I N A R Y Connecting to the Target Board
S3 Flash In-System Programmer
User Manual
6
Appendix A. Installing the S3 Flash ISP Driver
Observe the following procedure to install the S3 Flash ISP driver on a Windows 7 sys-
tem. A similar installation can be followed on Vista or XP machines.
1. Connect the S3 Flash ISP to a USB port on your development PC. When the PC
detects the new hardware, it will display the Installing Device Driver Software dialog.
2. Windows automatically searches for the driver; this process can take a few moments.
Because there is no option to terminate this search process, wait for the search to com-
plete. If Windows cannot find the driver, you will see a message similar to the image
shown in Figure 4. If that is the case, close the search dialog and proceed to the next step.
3. In the Search programs and files field in the Windows Start menu, enter Device
Manager . The Device Manager will appear in a list of search results.
4. From this list of results, click Device Manager to open the Device Manager dialog,
which presents a list of devices that operate on your PC. Find and toggle Other
devices to view a sublist of additional devices, select the S3 Flash ISP II device and
then right-click on Properties as shown in Figure 5.
Figure 4. A Windows Driver Installation Failure Message