Zektor ProAudio 16™ DSP Preamp Audio Matrix - Manual (Page 31)

ClarityAudio Serial Protocol, Version 1.01, 11/8/12 29
Advanced Control
Advanced Control
Reference for Advance Control Commands
These commands are for more advanced control over the ClarityAudio.
Advanced Control Commands
Advanced Command Definitions
‘V’ Version
Returns the current firmware version of the ClarityAudio.
^V ?$
Response String:
^=V “CasinoAV16x16”,1.0a,30B2S12345678$
Where:
“CasinoAV16x16” = Model (varies by model)
1.10a = Firmware version
45B1S12345678 = Serial number
‘QI’ Query for Zone, Input and Channel Information
Returns the number of zones, and inputs, and a mask of the channels available on the ClarityAudio.
^QI ?$
Response String:
^=QI chan_bitmap,vinputs,vzones,ainputs,azones,dinputs,dzones$
Where:
chan_bitmap = Bitmap of the available channels
vinputs = Number of video inputs
vzones = Number of video zones
ainputs = Number of analog audio inputs
azones = Number of analog audio zones
dinputs = Number of digtial audio inputs
Command Description Comments
V ? Get version string Returns: Product name and firmware version string.
QI ? Query for capability information Returns: Number of zones & inputs, and a full channel mask.
XS flags Control settings Set / reset control options. flags=Control option flags (see text).
SS flags Save Settings Save specified settings as initial power on values. flags=Indicates which settings to save.
FS flags Reset to factory settings Resets selected values to initial factory settings. flags=Indicates which settings to reset.
IPA xxx,xxx,xxx,xxx View or change TCP/IP address View the current IP address, or change it.
IPM xxx,xxx,xxx,xxx View or change TCP/IP mask View the current IP mask, or change it.
IPR xxx,xxx,xxx,xxx View or change TCP/IP router View the current router IP address (gateway), or change it.
Table 3: Advanced Control Commands