Xtramus XG2 V1.3 - Manual (Page 21)

21
3.2. Operation via Console Port
After connecting the COM port of PC to Console port of XG2 via Console cable, power on the PC and configure the
PC parameters as following path of Windows (by using Windows Hyper Terminal software):
Start Æ All programs Æ Accessories Æ Communications Æ Hyper Terminal
1. Input a name for this connection, such as XG2, and also select
an icon for this connection.
2. Select the COM port of PC for this connection. Generally, it is
COM1.
3. Configure the parameter of COM port as below, 38400, 8,
None, 1, None
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®