Xilica Uno Series - Manual (Page 13)

Uno Series - Quick Start Guide
XILICA AUDIO DESIGN CANADA / EUROPE / ASIA – www.xilica.com
Pag
e
13
Note: Once you are in Project View working on a DSP design you are able to switch back
and forth betwee n “Project View” and “Network View” by selecting the grey Network View /
Project View button at the top right of the work page area.
Processor Module

From the System Components menu under Component Libraries on the left, click and
drag the Uno processor module you are going to use for your application and this DSP
design project onto the Project Views white work area. For our example we chose the Uno
U0808. You will notice that the Uno U0808 processor module placed in the project
view/design mode work area is a light see through red color.
Processor Module / Project View
(a) With the red Uno U0808 DSP module placed in the Project View work area we can create the
overall project view of the application design by dragging source and other components into the
work area and wiring/connecting them to the processor module to then represent the other
physical audio components that are connected to the physical Uno processor.