wePresent WiPG-1500 - Manual (Page 26)

26 Chapter 9 DoWiFi for Windows
→Back
Item Description
Show Receiver Information Show Receiver Information on screen
Web Admin Open web admin page
Search Receiver Connect to another receiver device
Launch SidePad Launch SidePad sender
Enable WebSlides Enable WebSlides
Select Projection Desktop Select the projection desktop
Projection Quality Change projection quality
Projection Mode Change the presentation or video mode.
Resolution Setting Change the resolution setting
Projection Aspect Ratio Change the projection screen aspect ratio
Enable IWB USB Bridge Enable IWB USB bridge
Advanced Screen Capture Enable advance screen capture
Send Audio to Display Enable audio projection
Auto Power Management Enable Auto Power management feature
Auto WiFi Connect Enable Auto WiFi connect feature
Make Plug&Show Token Make Plug&Show USB token
Copy Application to Desktop Copy the application to desktop
Hot Key Hot Key Settings
About About this application
Exit Exit the application
9.10.1 Show Receiver Information
Click “Show Receiver Information”, it will display the Receiver Information,
such as WiFi Name, IP Address and code on the upper of desktop, and it will close
automatically after 30 seconds.
9.10.2 Web Admin
Click “Web Admin”, it will open the browser and connect to the receiver web admin
page automatically. (You can find the details of web admin page from another
chapter.)
9.10.3 Search Receiver Device
Click “Search Receiver Device”, it will disconnect from current receiver and search
the receiver again.