WaveWare RCD-1 - Manual (Page 12)

WaveWare WaveWare WaveWare WaveWare Paging Data Receiver Paging Data Receiver Paging Data Receiver Paging Data Receiver
12
8. Programming
The RCD-1 is configured by connecting a computer’s RS-232 serial port to the programming port on the
receiver module within the RCD-1, using a programming kit that includes an interface board, connecting
cables, power supply, and programming software. The programming kit is sold as an optional item.
The RCD-1 incorporates a Gold Apollo receiver module, and uses the Gold Apollo programming hardware
and software to configure the RCD-1 feature set.
8.1. Programming Screens
Following are snapshots of the two screens in the RCD-1 programming software: