WaveWare TMR1P - Manual (Page 13)

DAVISCOMMS (S) PTE LTD
iv) If the user sends out the following page: “1234 [[[[r]”
Interpretation: This will Reset all the 8 ports to high impedance state
3.4 Example 4
If the user sends out the following page: “1234Daviscomms”, without the prefix “[[[“
Interpretation: Since there is no “[[[“ prefix, it is not meant to control the 8 output ports. The
display data is “Daviscomms”. The TMR1P will send Header1 “00ff”, Source ID
“4”, Trailer2 “eeff” and the message data “Daviscomms” to the RS232 serial
output.
3.5 Example 5
If the user sends out the following page: “1234[[A25BF6]]Daviscomms??22446688AA”, without
the prefix “[[[“
Interpretation: Since there is no “[[[“ prefix, it is not meant to control the 8 output ports.
The display data is “Daviscomms”. The TMR1P will send Header1 “00ff”,
Header2 “A25BF6”, Source ID “4”, Trailer1 “22446688AA “, Trailer2
“eeff” and the message data “Daviscomms” to the RS232 serial output.
4. TMR1P HARDWARE AND SOFTWARE INSTALLATION
Installing programming software and connecting test cables are described in this section.
4.1 System Requirements
Please make sure your system meets the following requirements:
- Intel Pentium or better processor
- 16 MB of RAM
- Microsoft Window 98 2ed, Windows 2000 or Windows XP operating systems
4.2 Software Installation
1. The programming software is downloadable from
http://www.daviscomms.com.sg/pager_software.html
2. The current software installation file is TMR1P TPS1.05.EXE. Follow the step-by-step
instructions on the screen during the installation.
4.3 Programming Kit Hardware
13 500088R03
DAVISCOMMS (S) PTE LTD
Blk70 Ubi Crescent #01-07 Singapore 408570. Tel: (65) 65471127 Fax: (65) 65471129