WaveWare Adaptive Remote - Manual (Page 22)

Remote Control Programming Manual
16 Beginning text messaging: Example 5 — Deleting messages
Example 5 — Deleting messages
To delete all the messages in a sign, see “Clearing a sign’s memory”
on page 5.
However, if you only want to delete selected messages, then use the
method shown in this example.
Step When you do this... You see this...
This example continues where Example 4 left off.
This example assumes that there are two messages (files A and B) in the sign:
File A = THIS IS YOUR FIRST MESSAGE, BUT NOW IT’S LONGER
File B = This is the second message
In this example, we’ll delete File B.
1 Press PROGRAM.
2
Press SELECT until B
appears on the sign.
3 Press DELETE.
4 Press Y to delete the file.
5 Press RUN twice.
PROG TEXT A
PROG TEXT B
DEL TEXT B? Y/N
PROG TEXT A
Fi
le
A
THIS IS YOUR
FIRST MESSAGE
THEN
BUT NOW IT’S
THEN
THEN
LONGER