Sound control, What to do when you forget a sign’s password, 7 how to delete a sign’s password – WaveWare Adaptive Remote User Manual
Page 13: Prog text a
Remote Control Programming Manual
Basic sign operation: Sound control
7
What to do when you forget a sign’s password
How to delete a sign’s password
If you no longer want to be prompted to password protect a sign, you
must clear the sign’s memory in order to delete the password. To do this,
see “Clearing a sign’s memory” on page 5.
Sound control
Normally, when you press a Remote Control key while programming
a sign, the sign will beep.
If you want to turn the beeping off, hold down
SHIFT
and then press
RUN
. (To turn the beeping on again, repeat this.)
Step
When you do this...
You see this...
1
Press PROGRAM.
2
Hold down SHIFT and press L six times.
3
Enter a new password. (See “Setting a sign’s password” on page 6.)
PROG TEXT A
******
CORRECT
THEN
PROG TEXT A
THEN