TVLogic LVM-173W-3G - Manual (Page 12)

Multi F
orma
t L
CD M
onit
or
12
Multi F
orma
t L
CD M
onit
or
12
◦ [DOWN/F1] Button
- Used to move down within the menus during OSD menu activation and also to decrease the value
of the selected feature.
- If the main/sub menu is not activated, the feature selected in “SYSTEM-DOWN/F1” setting will be
activated.
- Use UP/DOWN keys to select and proceed through various functions.
◦ [UP/F2] Button
- Used to move up within the menus during OSD menu activation and to increase the value of
the selected feature.
- If the main/sub menu is not activated, the feature selected in “SYSTEM- >UP/F2” setting will be
activated.
- Use UP/DOWN keys to select and proceed through various functions.
◦ [ENTER/F3] Button
- Used to confirm a chosen value (or mode).
- If the main/sub menu is not activated, the feature selected in “SYSTEM- >ENTER/F3” setting will
be activated.
- Use UP/DOWN keys to select and proceed through various functions.
- See section “Other Functions [2]SCAN button” for more information.
◦ [APERTURE] knob (LVM-173W-3G)
- Used to adjust the picture sharpness.
- Control value range: 0 ~ 25
- Unavailable in DVI ANALOG Mode.
◦ [BRIGHT] knob (LVM-173W-3G)
- Used to adjust the degree of brightness.
- Control value range: -100 ~ 100
◦ [CHROMA] knob (LVM-173W-3G)
- Used to adjust the saturation of the image.
- Control value range: -50 ~ 50
- Unavailable in RGB, DVI ANALOG, DVI DIGITAL and HDMI modes.
◦ [CONTRAST] knob (LVM-173W-3G)
- Used to adjust the contrast.
- Control value range: -100 ~ 100
◦ [VOLUME] knob (LVM-173W-3G)
- Used to adjust the volume for internal speaker and external output.
- Control value range : 0 ~ 30
◦ [TALLY] Lamp
- Tally lamp that can be toggled in green or red using the REMOTE(RJ-45) port.
Controls, Indicators and Connections