Other functions, 1] scan button, 2] pixel to pixel – TVLogic LVM-091W-3G User Manual

Page 25: Position change in pixel to pixel

Multi Format LCD Monitor 25

7. Other Functions

[1] SCAN Button

• This product supports various scan modes.

• Press [SCAN] button on the front of the

monitor to activate different scan modes.

1. [Press [SCAN] button continuously to

activate various scan modes:

ZERO SCAN -> OVER SCAN -> Pixel To Pixel

-> USER.

2. The following represents the different types

of scan mode. When a scan mode is selected,

display skips the next mode if its required

condition is not met.

- OVER SCAN : Zooms in/out of the image to

96% of its original size without changing the

aspect ratio of.

- ZERO SCAN : Zooms in/out of the image

without changing the aspect ratio.

- Pixel To Pixel SCAN : 1:1 pixel mapping

of original image. This feature is available

only when the size of the original image is

bigger than the screen size. Press [ENTER]

button to rotate the position.

MID LEFT -> TOP LEFT -> TOP MID -> TOP

RIGHT -> MID RIGHT -> BOT RIGHT -> BOT

MID -> BOT LEFT

[2] Pixel to Pixel

* LVM-091W-3G monitor provide pixel count info

using Pixel to Pixel mode.

* Select [Scan] mode in the OSD menu to activate

the[Pixel To Pixel] mode.

* After activation of [Pixel To Pixel] mode, use the

Knob to move the position.

# Pixel to Pixel mode is not available for Graphic

Signal input.

# Pixel to Pixel mode works for SD signal, when

the input resolution is lower than the monitors

native resolution.

•

Positions in HD Signal 1080i/1080p mode

DOWN

Input

Action

Available Modes

720p

[Scroll UP]

(Clockwise)

Center -> Left Top -> Right Top

-> Right Bottom -> left Bottom

-> Center -> …

[Scroll

DOWN]

(Counter

clockwise)

Center -> Left Bottom -> Right

Bottom -> Right Top -> Left

Top -> Center -> ….