TVLogic LVM-091W-3G - Manual (Page 16)

16 Multi Format LCD Monitor
[4] GPI / UMD
5. Menu Operations
• GPI 1~8
- This item activate/ deactivate the REMOTE
function.
- The user may connect an RJ-45 jack to the
REMOTE terminal on the rear of the unit and
designate a function for each pin.
- The default settings are as follows :
PIN 1 : Analog Channel
PIN 2 : DVI Channel
PIN 3 : SDI-A Channel
PIN 4 : SDI-B Channel
PIN 5 : TALLY R
PIN 6 : TALLY G
- PIN 7 is POWER ON/OFF use only, PIN 8 is GND.
REMOTE (RJ-45)
1: Pin1
2: Pin2
3: Pin3
4: Pin4
5: Pin5
6: Pin6
7: Pin7
8: GND
1 8
- The selectable values are as follows :
Menu
Classifi-
cation
Settable Values
PIN
1~6
NONE, Analog Channel, DVI
Channel, SDI-A Channel, SDI-B
Channel, TALLY R, TALLY G,
TALLY Y, UNDER SCAN, 1:1 SCAN,
ASPECT, H/V DELAY, BLUE ONLY,
16:9 MARKER, 4:3 MARKER, 4:3
ON AIR MARKER, 15:9 MARKER,
14:9 MARKER, 13:9 MARKER, 1.85:1
MARKER, 2.35:1 MARKER, 1.85:1&4:3
MARKER, CENTER MARKER, SAFETY
AREA 80%, SAFETY AREA 85%,
SAFETY AREA 88%, SAFETY AREA
90%, SAFETY AREA 93%, SAFETY
AREA 100%