TVLogic LVM-091W-3G - Manual (Page 12)

12 Multi Format LCD Monitor
5. Menu Operations
• Brightness
- This item indicates brightness value between
-100 ~ 100.
#Brightness can be adjusted by using the
[BRIGHT] control knob on the front of the
monitor.
• Contrast
- This item indicates contrast ratio value
between -100 ~ 100.
#Contrast can be adjusted by using the
[CONTRAST] control knob on the front of the
monitor.
• Chroma
- This item indicates saturation value between
-50 ~ 50.
#Chroma can be adjusted by using the
[CHROMA] control knob on the front of the
monitor.
• Phase
- This item indicates phase value between -40
~ 40.
#Phase can be adjusted by using the [PHASE]
and [UP]/[DOWN] button.
• Aperture
- This item indicates sharpness value between
-12 ~ 12.
#Aperture can be adjusted by using the
[APERTURE] control knob on the front of the
monitor.
• NTSC Setup
- This item sets the IRE value under NTSC mode
between 0 IRE and 7.5 IRE.
- Only available in COMPOSITE 1/2/3 and
S-VIDEO modes containing a NTSC signal.
• Knob Lock
- This item locks the control knobs(APERTURE,
BRIGHT, CHROMA, CONTRAST, VOLUME) on
the front of the monitor.
[1] Picture