TVLogic LQM-171W - Manual (Page 9)

Multi F
orma
t L
CD M
onit
or
Controls, Indicators and Connections
3. LED INDICATOR
◦ [USB] Indicates the connectivity between USB Port and PC. The LED will start to blink when
transmitting data with the PC to indicate the current status.
◦ [ETHERNET] Indicates the connectivity between Ethernet Port and Network. The LED will start to
blink when transmitting packets with PC to indicate the current status.
◦ [STAT] Indicates the current status of the Monitor. (Not supported under firmware V1.2)
◦ [CFG] LED turns on when the Monitor is updating its firmware. If the LED is on, do not turn off
the power of the monitor.
4. SELECT / BRIGHT ENCODER
◦ Rotate : Used to adjust the value of the selected feature and brightness.
◦ Press : Used to control the brightness of selected display.
5. CONTRAST ENCODER
◦ Rotate: Used to adjust the value of the contrast.
◦ Press: Used to control the contrast of selected display.
6. CHROMA ENCODER
◦ Rotate: Used to adjust the value of the saturation.
◦ Press: Used to control the saturation of selected display.
7. MENU ENCODER
◦ Rotate: Used to navigate the menu or to control the value of the selected feature.
◦ Press: Used to move to the next menu or to confirm a chosen value. Also, Press and hold for
1 second to return to the previous menu.
8. TALLY
◦ By using the remote, the tally light can be used for each input channel in either red or green.
At the same time, the selected channel’s image displays the Red/Green tally graphic.