TVLogic LEM-250C - Manual (Page 9)

FHD OLED Reference Monitor 9
3. Controls & Functions
FRONT
●
[ANALOG] button/lamp
- Used to select the desired Analog input.
Press the Analog button to activate
the analog input menu selection, then use
the UP and DOWN button to select desired
input.
●
[DIGITAL] button/lamp
- Used to select the desired Digital input.
Press the Digital button to activate
the Digital input menu selection, then use
the UP and DOWN button to select desired
input.
●
[SDI-A] lamp
- Used when SDI-A INPUT is selected.
●
[SDI-B] lamp
- Used when SDI-B INPUT is selected.
●
[F1] (In Single Mode) button/lamp
- Used to activate the function.
- Push the button to activate the factory
default function printed on the top of the
button. User may asign another function to
this button from the OSD menu - “SYSTEM
->KEY FUNCTION1”
●
[F1] (In Multi Mode) button
- Used to select a display in Multi Mode.
(Screen 1, Screen 2, Full Picture)
●
[F2] button/lamp
- Used to activate the function.
- The feature selected in “SYSTEM->KEY
FUNCTION2” setting will be activated.
●
[F3] button/lamp
- Used to activate the function.
- The feature selected in “SYSTEM->KEY
FUNCTION3” setting will be activated.
●
[F4] button/lamp
- Used to activate the function.
- The feature selected in “SYSTEM->KEY
FUNCTION4” setting will be activated.
●
[F5] button/lamp
- Used to activate the function.
- The feature selected in “SYSTEM->KEY
FUNCTION5” setting will be activated.
●
[F6] button/lamp
- Used to activate the function.
- The feature selected in “SYSTEM->KEY
FUNCTION6” setting will be activated.