TVLogic LEM-250C - Manual (Page 10)

10 FHD OLED Reference Monitor
FRONT
3. Controls & Functions
●
[USB]
- This terminal is used to upgrade the firmware.
●
[AUDIO OUT]
- Used for Stereo Audio Output through Phone
Jack.
●
[CONTRAST]
- Used to adjust the contrast.
●
[BRIGHT]
- Used to adjust the degree of brightness.
●
[APERTURE]
- Used to adjust the picture sharpness.
●
[MENU] button
- Used to activate the OSD menu.
- When the OSD menu is activated, press this
button to exit from the menu.
●
[DOWN] button
- Used to move down through the menus
during the OSD menu activation and also to
increase the value of the selected feature.
●
[UP] button
- Used to move up through the menus during
the OSD menu activation and also to
decrease the value of the selected feature.
●
[ENTER] button
- Used to confirm a chosen value (or mode).
●
[POWER] button
- Used to turn the power on and off.