页面 13 – Tview D72TSB User Manual

Page 13

WARNING:

1. To ensure the accurate of touch function, please touch the center point

of relative function.

2. There are build in anti-jamming system in touch screen, To prevent the

wrong position touch, please keep to touch this function for 0.5 second,

then the product will get respond for your instruction.

3. Please do not use the object, which is bigger than the function icon to

touch the screen. Otherwise the touch function will failure or give the

wrong operation to other function.

4. To ensure the panel safety, please don't press or use the sharp object to

touch the panel.

5. Don't play the severity scratch disc, otherwise will damage the DVD play

capability.

6. Be sure to distinguish the anode and the cathode when connecting the

power. If connect wrong, the fuse in filter box will melt immediately to

protect unit. Then please replace the same parameter fuse.

FM Frequency range

MW Frequency range

S/ N 30db

S/ N Ratio

87 . 5～1 08 . 0M HZ

522～1620KHZ

15 d Bu

35dBu

50dBu

40dBu

80dBu

Video output scope

Max output power

75Ω

4Ω60W*4CH
1+/-0.2V

≥600

AUDIO

VIDEO

Video Hovizontal
Resolaton

Antenna resistance

Noise limit sensitivity

FUNCTION INDEX SIGN

TROUBLE SHOOTING

7. DC 12V should be best to connect with the power adapter to prevent from
the over-voltage drop the may influence the normal work of the monitor.
8. Keep this machine away from too hot, or under effect of moisture, dust
or oil smoke, avoid this machine from dropping or impacting, never
extrude or chafe this machine with sharp objects.
9. Dangerous high voltages are present inside the enclosure. Do not open
the cabinet, non-professionals can not disassemble unit
10. Installation should be very tight and secure. Preventing the fallen unit
hurt people when moving on or a sudden brake.