Set-up and welding, Connecting the ground clamp – Tru-Weld TWE250 CD Welder User Manual

Page 13

Text mode
Original mode

CONNECTING THE GROUND CLAMP

Attach the clamp of the welding ground lead to the work piece. Prior to securing the
clamp, make certain that the contact area is free of rust, paint, grease, or any other
impurities to ensure a good ground connection.

NOTE***Most applications will require only one ground clamp, but certain applica‐
tions will require an additional dual clamp.

SET-UP AND WELDING

This manual is related to the following products:

TWP-2 Pin Welder TWE321 CD Welder TWE375 CD Welder