Shutdown – Toyotomi EPH-121 User Manual

Page 11

The ON timer can be changed by pressing ON timer
switch even if it is set completely.

If you wish to cancel the ON timer, press the ON timer
switch until ON timer lamp goes off.

Your heater can be operated with Panel select switch and
Temperature select switch when ON timer lamp is blinking.

NOTE

Power lamp

Operation
(ON/OFF)
switch

Panel operation
lamp

Panel select
switch

Temperature
amp

Timer
lamp

Temperature
select switch

OFF timer switch

ON timer switch

You can set the ON timer to turn on automatically at the set time by
pressing the ON timer switch during operation and shutdown.

During operation

1 Press the ON timer switch during operation.

Your heater will stop the heating operation and will be standby
condition for ON timer function.
ON timer lamp will be blinking for a few seconds.

2 Press the ON timer switch to select the time when ON timer lamp

is blinking.
Timer lamp will be lit
repeatedly.
ON timer lamp will be lit after blinking for a few seconds and the
ON timer function is set completely.

3 Power lamp, ON timer lamp and Timer lamp will be lit and the

heater will turn on at the set time.

During operation

1 Press the ON timer switch during shutdown.

ON timer lamp will be blinking for a few seconds.

2 Press the ON timer switch to select the time when ON timer lamp

is blinking.
Timer lamp will be lit
repeatedly.
ON timer lamp will be lit after blinking for a few seconds and the
ON timer function is set completely.

3 Power lamp, ON timer lamp and Timer lamp will be lit and the

heater will turn on at the set time.

1 Press the Operation switch to turn the unit off.

Operation lamp, Panel operation lamp and Temperature lamp will go off.

2 Be sure that the Power lamp goes off before unplugging after using the heater.
3 Pull out the Power plug from the electrical outlet.

[1(h)]

⇒ [2(h)] ⇒ [4(h)] ⇒ [8(h)]

[cancel]