Top Global MB8000 - Manual (Page 28)

Top Global USA. ----MB8000 User Guide
- 27 -
3.3.3.5 Filters
The MAC access section allows you to add, edit or delete users who can access MB8000.
Users are identified by their MAC address.
z Access control Status: This parameter indicates whether access control by MAC
address is enabled or disabled.
z Access control Operation Type: Choose between Allow and Deny. This
determines how the stations identified in MAC Access Table are filtered.
Add an Entry to the MAC Access Control Table
1. Click the Add button in the MAC Access Control table.
2. Enter the MAC Address of the client station.
3. Add comment (optional).
4. This entry is automatically enabled.
Disable or Delete an Entry in the MAC Access Control Table
1. Click the Edit button in the MAC Access Control Table.
2. Select the MAC Address you want to disable or delete
3. Click
OK
The Private network filter is used to prevent some packets from being sent to Internet,
which destination IP address are in the private network range.
z Status: This parameter indicates whether this filter is enabled or disabled.
Figure 3- 14 Filters
3.3.3.6 Web Portal
Web portal is an authentication method which authenticates users by requiring them to