Top Global MB8000 - Manual (Page 10)

Top Global USA. ----MB8000 User Guide
- 9 -
Figure 2-3 MB8000 Top View
The MB8000 power supply accepts any input AC voltage in the range of 100-240 VAC.
2.5 LED Indicators
MB8000 has four two-color LEDs to indicate the working status. The follow table shows
the status when the MB8000 is configured successfully and running properly.
Table 2-1 Normal LED Indications (Use WWAN to Connect to Internet and No WAN)
Power WLAN WWAN LAN
Green when
MB8000 is
ready. Red if an
error occurs. For
example, corrupt
firmware. Green blink Green if WWAN is
transferring data. Red
if WWAN is in error
status.
Green blink if LAN is
transferring data.
2.6 Initialize the MB8000 Unit
1. Connect MB8000 with your computer. There are two ways to connect MB8000 with
your computer:
I. Connect your computer to MB8000 using a “Cross-over” Ethernet cable or a
hub and set your computer with “Automatic IP” configuration.
Note：If you connect your computer to MB8000 directly, you should use a
“Cross-over” Ethernet cable. If you connect your computer to MB8000
through a hub, you should have two parallel Ethernet cables at least.
II. Alternatively, you can connect your computer to MB8000 with wireless LAN.
a) Install an 802.11b wireless LAN PC card in a laptop or other computer,