Thrustmaster TH8A Shifter - Manual (Page 13)

12/18
XBOX ONE
= With all Xbox One games, always connect the TH8A shifter directly to
the Thrustmaster racing wheel's base (NEVER to the game console's
USB port).
- Connect the TH8A shifter's DIN connector to the DIN / DIN detachable cable.
- Connect the TH8A shifter to the shifter connector located at the back of the racing wheel's base. -
Connect your racing wheel, then start the game.
The TH8A shifter can then operate with either the H-PATTERN (7+1) or SEQUENTIAL (+/-)
shift plates.
Important note about the Xbox One:
When using the TH8A shifter's SEQUENTIAL (+/-) shift plate, the shifter is connected to the racing
wheel's UP (= RB) and DOWN (= LB) paddle shifters.
When using the TH8A shifter's SEQUENTIAL (+ /-) shift plate, the TH8A shifter functions with
100% of racing games for Xbox One that are compatible with the Thrustmaster racing wheel
for Xbox One.
* A list of games for Xbox One that are compatible with the TH8A shifter is available
here:
http://ts.thrustmaster.com (in the 'Xbox One / Wheel / TH8A Shifter' section). This list is
updated regularly.
* Some games require that you install the latest available updates for the TH8A shifter
to function correctly (your games console must be connected to the internet).
To ensure compatibility of your Thrustmaster racing wheel for Xbox One with the
TH8A shifter, you may be required to update the racing wheel's firmware with the
latest version available via PC here: http://ts.thrustmaster.com (in the 'Updates
and downloads / Xbox One / Wheel / TX Racing Wheel / Driver / Firmware'
section).