Thrustmaster Force Feedback Racing wheel - Manual (Page 6)

Thrustmaster Force Feedback Racing Wheel – User Manual 6
This manual describes driver
installation for Windows 98,
Millennium and 2000. Your installation
screens and procedure may vary slightly
from what is shown and described in this
manual. These variations may be caused
by other software/hardware installed on
your computer, or the version of the
Windows operating system.
fig.1
fig.2
IV. DRIVER/SOFTWARE INSTALLATION
The USB connectors on the Thrustmaster Force Feedback Racing Wheel enable you
to hot-plug your racing wheel on your PC’s USB ports.
Plug the Thrustmaster Force Feedback Racing Wheel into the mains using the mains
cable provided. Place the switch at the back of the racing wheel to the On position and
plug the USB connector into the USB port at the back of your CPU (Central
Processing Unit). The new peripheral will be detected automatically.
Please consult the passage corresponding to the operating system installed on your
machine for the procedure on how to install the drivers of your racing wheel.
D RIVER /S OFTWARE I NSTALLATION F OR W INDOWS 98
The Add New Hardware Wizard will propose to search for optimized drivers or
display a list of current drivers. Insert the installation CD-ROM into the appropriate
drive (wait a few moments for the computer to recognize the CD). Enable Search for
the best driver for your device (Recommended) and click on Next (fig.1).
Enable CD-ROM drive and click on Next (fig.2). Windows will then specify the path
and the name of the folder where the drivers are located. Click on Next to continue
driver installation.
Once you have completed installing the drivers, the Force Feedback Racing Wheel
Editor will install itself automatically. Follow the on-screen instructions to install this
program in the default directory C:\PROGRAM FILES\THRUSTMASTER\
FORCE FEEDBACK RACING WHEEL.
Click on Finish. You are now ready to test your racing wheel (see Installation Test).