Thrustmaster Dual Trigger Wireless Rechargeable - Manual (Page 3)

2/6
INSTALLATION OF THE RECHARGEABLE BATTERIES
1. Remove the gamepad’s battery compartment cover.
2. Insert rechargeable batteries, then replace the cover.
INSTALLATION ON PC
System requirements: PC (Windows 98SE, Me, 2000, XP) equipped with USB port.
The CD-ROM included with this product allows you to install the Force Feedback drivers.
1. Insert the installation CD-ROM into your CD-ROM drive. Follow the on-screen instructions to install
the Force Feedback drivers. Once the installation is complete, click Finish and restart your computer.
2. Once your computer has restarted, connect the USB connector on the docking station (17) to one of
your computer’s USB ports. Windows 98/Me/2000/XP will automatically detect the new device. (If you
are connecting a USB device for the first time, Windows may ask you to insert the Windows CD-ROM
during the installation procedure in order to install the required system files.)
3. Driver installation:
Windows 98: the Add New Hardware Wizard will search for the appropriate drivers. Click Next.
Follow the on-screen instructions to complete the installation.
Windows Me/2000/XP: the drivers are installed automatically.
4. Select Start/All Programs/Thrustmaster/Force Feedback driver/Control Panel.
The Game Controllers dialog box displays the gamepad’s name with OK status.
USING YOUR GAMEPAD ON PC
1. To play on PC, plug the gameport receiver (11) into the gameport connector slot on the docking
station (14).
2. Set the gamepad’s switch (6) to one of the VIB positions to turn the gamepad on. Connection
between the gamepad and the gameport receiver is automatic and the LED stops flashing.
3. In the Control Panel, click Properties to configure your gamepad:
• Test device: allows you to test and visualize the buttons, the D-Pad, and the axes of the 2 mini-
sticks and the 2 triggers.
• Test forces: allows you to test 8 vibration effects and configure the vibration effect settings.
INSTALLATION ON PS2
1. Remove the gameport receiver (11) from the gameport connector slot on the docking station (14).
2. Plug the gameport receiver (11) into a controller port on your console.
3. Turn on the gamepad using the switch (6).
4. Turn on your console and start up your game.
You are now ready to play!