Thor 4 Ch HD-SDI Encoder w/ CC & AC/3 - Manual (Page 17)

H-2/4HD-EM(S/H)
IP Stream
Submenus under ‘IP Stream’ are for setting the output IP stream in MPTS or SPTS.
5) System
Users can set the system parameters in this menu. Enter ‘System’ submenus to
separately set corresponding parameters.
Data Enable
Null PKT Filter
Output IP
Output Port
Service IP
Subnet Mask
Gateway
Protocol
IP Stream
4.2.1 MPTS Output
4.2.2 SPTS Output A
4.2.3 SPTS Output B
4.2.4 SPTS Output C
4.2.5 SPTS Output D
System
5.1 Save Config
5.2 Load Saved CFG
5.3 Factory Reset
5.4 LCD Time-out
5.5Version
Save Configuration?
Yes
No
Load Saved CFG?
Yes
No
Reset All Sets?
Yes
No
LCD Time-out
30 s
Choose yes to save settings.
and press ENTER to confirm
Choose yes to restore the
device into factory’s default
configuration.
It displays the device name
Choose yes to restore the
device into the last saved
configuration.
Press DOWN/UP key to select
a time out for the LCD lighting
duration (5-120 seconds)