TEKVOX TekMonitor 2 - Manual (Page 12)

TEK 2 User’s Manual
V111813
12
TEK
VOX, Inc. – 210.348.6565 –
www.tekvox.com San Antonio, TX 78216
Applications
TekMonitors are not programmed like other control systems using a program language; they are
configured using a PC application called TekWizard. With some IT experience an installer is able to
configure a TekMonitor by following the step-by-step guide in TekWizard. Although there is no
programming, TekWizard does provide for some logic operations in the creation of macros. A macro is
just a list of commands executed by a logic input, software, user or time event. A macro is basically a
group of commands to provide simple automation.
The Logic Inputs generate two types of events that are linked to macros. These input events occur when
the input goes high (open circuit) or low (connection to ground).
These applications provide the system integrator with some concepts of how to apply the TEK 2. Within
TekWizard are templates that coincide with these applications.
TEK 2 Applications

Standard Projector Connection

12 volt Security Alarm

Miniature 24 volt Security Alarm

Occupancy Detection and Lighting

Occupancy Detection, Lighting Control and Miniature Alarm

Occupancy Detection, Lighting and Screen Control

IR Control
Standard Projector Connection
TekWizard Template: TEKVOX
– TEK2 Standard
In a standard configuration a TEK 2 is used to control and monitor a video projector or large screen
display. The TEK 2 is usually installed in the ceiling above a projector using the TekSecurity cable.
Features

Internal timers for Lamp,
Maintenance, Monthly Usage,
Total Usage and System Off

Detects cut cables for device
security (Reports by Email)

Email Reports including
Device Errors, Monthly Usage
and Security Email